Aim-TTi has extended its QL series of precision power supplies by adding a higher voltage triple output model. The new QL564T has two identical outputs of either 56V/2A or 25V/4A plus an auxiliary output variable between 1V and 6V at 3A.
The QL series are true linear power supplies offering high precision with very low noise. With a total output power in excess of 240 watts, the QL564T includes linked mode operation for series or parallel operation up to 112 volts or 8 amps.
Numeric or spin-wheel entry can be used and the setting resolution is 1mV or 0.1mA. The auxiliary output voltage and current can be monitored at a press of a button and can be set to a resolution of 0.01V.
The QL564T is manually controlled only, while the QL564TP adds full bus control via USB, RS232, GPIB and LXI compliant LAN interfaces.
Review - House to Try Spending Bills Yet Again – DOD, DHS, State, and ARD -
-
Well, as I mentioned yesterday, it was rinse and repeat on the floor of the
House today. The House convened at 10:00 am EDT and then recessed at 10:33
su...
No comments:
Post a Comment