A single, intelligent stator can be used with any KiTorq rotor of the same speed rating and will automatically recognise the rotor measuring range. This minimises hardware investment as one stator may be used with rotors of differing ranges for different applications. Installation is simplified by the contactless, digital telemetry that does not require an antenna ring. The lack of an antenna ring has not reduced the precision of the sensor which has an excellent signal bandwidth of 10 kHz and accuracy of better than 0.05%.
The stator supplies frequency, analogue and digital signals outputs that are fully scalable via an RS-232 or USB interface. When needed, the rotor's original measuring range may be overridden to allow the full output signal to be available over a defined range. A second, freely selectable measuring range may also be defined at each output.
The solid measuring flange is extremely robust and has been tested to EN 60068-2-27 for mechanical shock, EN 60068-2-6 for triaxial vibration loading and EN 61326-1 for interference immunity. The KiTorq system is supplied as standard with SensorTool configuration and diagnostic software and calibration certificates. Several calibration options are available for the configurable output signals of the KiTorq system and when replacing an individual rotor or stator, the notional calibration values can be calculated to avoid the need to have the unit recalibrated by the manufacturer.
The KiTorq measuring flange is ideal for use in test rigs for electric motors, internal combustion engines, transmissions, pumps and compressors.
No comments:
Post a Comment