Wednesday 17 February 2021

Vibration testing of bolt connections.

TesT has launched the next generation of Junker testing machines with transverse displacement amplitude control. This new technology allows simulation of the conditions in the field even more realistically.

A bolted connection often bears a lot of responsibility: e.g. in railroad or aeronautical engineering. But what can it withstand and how long before it loosens? The Junker test has always been the preferred method to get the required answers for quality assurance. It is used in particular to measure the service life of a bolted connection under dynamic transverse load. But the established method still had its weaknesses. 

Up to now, it has only been possible and standardized on a vibration test stand to adjust the transverse stroke without specimen before the test. During the test, however, the actual resulting stroke declined because the bolted connection was tightened. If the bolt then loosened during the test, the stroke continued to change. 

In the field it is ultimately the forced transverse stroke that leads to the loosening of bolt connections. In order to enable a more differentiated test setup, the new TesT 208.200kN allows to control the transverse stroke in a closed loop as desired during the running test. The transverse displacement amplitude can be kept constant. Any desired ramps or other sequences can be simulated. 

The product innovation already anticipates the new aviation standard ISO 16130, which describes amplitude regulation during the execution of experiments as preferred. It meets DIN 65151, DIN 25201-4, DIN 16130 and can be used to test all elements of bolt connections and locking systems. With the 208.200kN, TesT has further developed the Junker test decisively, setting new standards in the quality assurance of bolted joints. 

@PresseBox #TandM #Safety

No comments:

Post a Comment