Monday, May 7, 2018

Energy-saving medical power supply with high power density.

The new BEO-3000M AC/DC switching power supply series from Bicker Elektronik was developed for space-saving installation in medical devices and medical computer systems. The 3x5" open frame power supplies are available with precisely regulated DC single output voltages of 12 V, 24 V, 36 V or 48 V, which can be fine tuned in the range of ±5%. In addition, a 5 V standby and a 12 V fan output is available.

The particularly high quality and robust built medical power supplies for reliable 24/7 continuous operation provide an output power of 250 watts fanless or 300 watts with 10 CFM airflow. With a high efficiency of up to 94%, a standby power consumption of less than 0.3 W and an operating temperature range of -40°C to +70°C, the BEO-3000M series is also convincing in closed systems. For international use, the medical switching power supplies have a wide-range input (90 to 264 VAC at 47 to 63 Hz) with active PFC power factor correction. With a high isolation voltage of 6516 VDC between input and output, the BEO-3000M series complies with the medical safety standard 2xMOPP (Means Of Patient Protection) and has international medical safety approvals: IEC60601-1:2005+A1:2012 (Edition 3.1), EN60601-1:2006+A1:2013 (Edition 3.1), ANSI/AAMI ES60601-1:2005 (3rd Edition).

The BEO-3000M series comes standard with short circuit and overtemperature protection with auto-recovery and over-voltage protection with shutdown, as well as a remote sense function to compensate voltage drops on the output lines to the load. No base load is required at the outputs, so latest-generation mainboards (Skylake / Kaby Lake / Coffee Lake / Gemini Lake) with their special power-saving modes can be safely supplied. For operation of medical computer systems, the BEO-3000M power supplies also have ATX-compatible PSON and PG / PowerGood signal ports.

In addition to the long-term availability of at least 5 years Bicker Elektronik grants a warranty of 3 years on the power supply series BEO-3000M. In addition, the power supply specialist offers suitable accessories such as the two AC input cables X1-054 (2-pin) and CB-105-3-600 (3-pin), the IEC connector filter PSZ-1019-B1 incl. cable and ferrite as well product specific connection cable set PSZ-1035.

@bicker_de #Medical

No comments:

Post a Comment