Monday, 17 October 2016

Pressure transducers for absolute or gauge pressure in gases, vapors, liquids and dust.

The Cerabar PMP11, 21 and 23 pressure transducers, just introduced by Endress+Hauser, measure up to 6,000 psi and are factory spanable to specific application requirements. The transducers are available with threaded or welded hygienic process connections, meet a variety of industry standards including FDA, FM, IEC and Ex, and provide 4-20 mA or 0-10 Vdc output signals.

These durable and reliable transducers provide excellent performance. The Cerabar PMP11 and PMP21 pressure transducers measure pressures from -15 to 6,000 psi at temperatures from -40 to 212 °F with accuracy of 0.5% and 0.3%, respectively.

The Cerabar PMP23 pressure transducers measure pressures from -15 to 600 psi at temperatures from 14 to 212 °F with accuracy of 0.3%. The IP69 housing and process isolating diaphragm are 316L stainless steel. Fully welded hygienic process connections without additional adapters or O-rings are available for washdown applications. It may be used in CIP and SIP applications at temperatures up to 275 °F for a maximum of one hour.

Transducer models with a valve plug can be fitted with the PHX20 local display. The one-line LCD shows measured values, fault messages and information messages. The device display can be turned in 90° steps, making it easy to reorient as required for improved readability.

Approvals include CE, ATEX, FM, FDA, CSA, GOST, IEC Ex, NEPSI Ex, TIIS, RCM-Tick Marking (Australia) and others. The transducers correspond to Article 3 (3) of the EC directive 97/23/EC (Pressure Equipment Directive), and have been designed and manufactured in accordance with Category I or II, SEP.

@Endress_Hauser #PAuto 

No comments:

Post a Comment