Friday, May 20, 2016

Tool-free quick termination.

Harting has announced the introduction of its new Han® ES Press contact inserts with tool-free quick connection technology. These new inserts significantly reduce assembly time during wiring. In addition, jumpers offer the possibility of potential multiplication in the connector.

The secret of the design lies in the innovative cage clamp. The Han® ES Press’s cage clamp is delivered open so that the conductor can be inserted directly and without effort. Once the installer presses the actuator into the contact chamber, the cage clamp returns to its starting position, fixing the conductor end so that the conductor is electrically connected to the contact. This connection technique permits faster termination during wiring.

The Han® ES Press is also the first product in the Han E® product family that enables bridging of individual contacts for potential multiplication. Various longitudinal and transverse bridges are available, which for example, also enable star and delta circuits for motor control.

With a current capacity of 16A, the Han® ES Press is available in models 6, 10, 16 and 24 for housing sizes Han® 6 B, 10 B 16 B and 24 B. The contact inserts are mating compatible with the corresponding inserts in the Han® E, ES and ESS series. The cage clamps used are suitable for wire cross-sections between 0.14mm2 and 2.5mm2 and can be used with both solid and stranded wires (with or without ferrules).

@HARTING_Group #PAuto @PeterBushComms

No comments:

Post a Comment